Green color

 
94

C135 Rusian Green is similar to army color.  It is suitable to paint Gundam model kitt:

Geara Doga
Gelgoog
Hi-Zack
Zaku III Custom
Bawoo
Palace-Athene
GM Striker
Kshatriya
Launcher Strike Gundam
GINN Type High Maneuver
Forbidden Gundam
Gundam Dynames
Tieren Ground Type
GM Sniper K9
SxDxG Gundam
Graze
Graze Custom

Again, to get this brightness it is recommended to use SF283 base white 1000 or GS 02 surfacer evo white as surfacer.


95

Mr color C23 Dark Green (2) has a brownies green.  This Color is suitable for :

Full Armor Gundam
Gabthley
Loto twin set
Jegan [Ecoas Type]
GM Cannon II
Marasai [Unicorn Ver.]
Tieren Ground Type

 



96

Mr color C128 – Gray green is suitable for:

MS-06F Zaku II all variant
(zaku is not gundam lol, color base on manual book MG Ver 2 )

I think it needs a slightly more green to perfected the color on those model kitt


97

MR color C127 is a pastel green and it is suitable for Zaku Warrior – Seed Destiny.  I think the color is slightly off for Gundam model kitt


98

 

sample of C124


99

99 Mr color C175  flourence green is a common color of transportation model kitt particulary motorcycle.  This color is similar like the one used on Motor Rossi.  Other than that C64 is suitable for :

Meteor Hopper
Shaldoll Custom

Again, to get this brightness it is recommended to use SF283 base white 1000 or GS 02 surfacer evo white as surfacer.


100

 

100 Mr color C64 yellow green is a light green color suitable for :

Zaku III Custom
Bawoo
Palace-Athene
Shaldoll Custom


101

Gaia Ga 13 Viridian Green has a green color suitable for :

Zaku III Custom
Bawoo
Palace-Athene
Shaldoll Custom

 


 

102

Gaia Vo 36 Hayashi midori  is a strange green because it looks like flourecent green.  This color is suitable for

Meteor Hopper
Shaldoll Custom

 

Again, to get this brightness it is recommended to use SF283 base white 1000 or GS 02 surfacer evo white as surfacer.


All color together
103

 

Mr color Acrysion

acrysion

This is the result of Mr color N3 Red after two layers. First carefully paint horizontally and add vertical paint after the first layer is dried. Unlike the other Mr Hobby/ Tamiya/ Gaia, Mr color Acryson do not need thinner and you can use directly from the bottle.

In most of the case, I brush the edge of the object first to even out the paint.  However Accidentally I brush the whole things and result is pretty surprising.  The paint result came out smooth like using airbrush.  I think Mr color Acrysion is a good paint for beginner in brushing.


84

This is the result of Tamiya Acrylic X7 red after two layers in the same technique like previous picture ( two layers without thinner and directly from bottle)

I think Tamiya X7 is harder than N3.  The surface is not very smooth and you need to wait until it completely dried to add the second layer.  On the N3 experiment I did not wait till it completely dried. Tamiya X7 is not very forgiving compare to N3.  The paint will damage if you add the second layer and you will get cracks when it is dried, if the first layer is half dried


Comparision of MR color Acryson N3 and Tamiya Acrylic X7

85


86

Sample of Mr color Acryson with brush.  I did not wait till it completely dried to put second layer but the result is a smooth surfacer


87

Result of Mr color Acrysion and I will add the gold part soon


88

This is Mr color Acryson N9 gold.  It has to be brush 2 layers with a paint directly from the bottle those has been mixed a little longer to get this gold.  The color is similar with GA  122 starbright gold. If you add clear orange  on the N9 , it will become GA  122.


89

The result of N1 white.  After trial and error these are my conclusion on Mr color Acryson series:

  1. It has the strongest white color that I have ever met. Only 2 or 3 layers of white to make black color to be white as addition of 4 or 5 layer to smooth the color
  2. N11 is a little thin compare to N1. To get white flat I recommended to flat the N1 or N11 in the final paint after N1
  3. You need 10-20 minute to dry the color completely in order to get smooth paint without brush mark. You will need this particulary when you want to change dark color to white
  4. If the paint is too thick and you want to smooth it, you can sand paper it with wet sand paper number 1500 according to Indonesian standard ( or the softest one you can find)
  5. I recommended to paint the wide edges first for any bevel surface and use smaller brush for the the smaller brush for those part those are hard to be reach by bigger brush
  6. if dried completely , you can brush acrysion thinner without damaging the last acryson layer.
  7. Hobby brush is highly recommended to avoid bubbles on the surface
  8. The acrysion white is very strong and it can brush detail on any surface particulary the black one

90

This is the sample of Acrysion N2 black.  The first layer will give you result of perfect cover and gloss like air brush.  For second layer it is recommended to wait 15 minutes but 25 minute wait is a must to be completely dry.



91

This is a test of Tamiya Acrylic X11 chrome silver as second layer .  The first layer is black gloss.  Personally I do not like the result.  Tamiya Acylic x11 have course particles those create uneven refection so that the surface look matt


92

This is a test on Mr color Acrysion N8 Silver as second layer.  I am using the same  black gloss layer as the test on Tamiya acrylic X11 chrome silver as second layer. The result of N8 has better silver than X11 but can not compete with the silver in GA  121 using airbrush. N8 as smaller silver particles but you can see them with your eyes. Those silver particles give a better reflection so that you can see its metallic color



93

Comparison of Mr color N8 and Tamiya Acrylic X11

YELLOW, Lets get eye sore together

 

72 Mr color C4 Yellow has a yellow color like lemon.  To get this brightness it is recommended to use SF283 base white 1000 or GS 02 surfacer evo white as surface.  This C4 is good for :

V2 Gundam
Justice Gundam
Blitz Gundam
Sword Strike Gundam
Gaia Gundam
Force Impulse Gundam
Sword Impulse Gundam
Airmasters Gundam
G-Self
Turn A Gundam
AMX-107 Bawoo
Gundam Avalanche Exia
Reborns Gundam
0 Gundam
God Gundam
Gundam Wing zero Custom
Zeong
Perfect Gundam
GP-02 Physalis
Dreissen
Harrison’s Gundam F91
Gundam Kyrios
Gundam Arios
Gundam Dynames
Gundam Virtue
Gundam Throne Eins
Petit Bearguy Winning Yellow


 

Gaia GA 05

Gaia 05 Sunshin yellow is a standard yellow and good for most of the modeling kit. To get this brightness it is recommended to use SF283 base white 1000 or GS 02 surfacer evo white as surface.


ga 05 and c4

Comparison of C4 and Ga 05


 

c58

Mr color 58 Orange yellow is recommended for

Zaku I Thunderbolt Ver.
RGM-79[G] GM
RB-79K BALL
Full Armor Gundam
Duel Gundam Assault Shroud
Calamity Gundam
Gundam Heavyarms
NRX-044 Asshimar
Nobell Gundam [Berserker Mode]
Gundam G-Self Assault Pack
Gundam Astray Blue Frame Second L
Blaze Zaku Phantom
Gale Strike Gundam
Regen Duel Gundam
Gouf Ignited
Gundam Kyrios
Arios Gundam
Gundam Harute
Gundam Gusion Rebake

To get this brightness it is recommended to use SF283 base white 1000 or GS 02 surfacer evo white as surfacer.


 

76

Gaia GA 25 Orange yellow. Although it has the same name as Mr color C58 orange yellow, Gaia Ga 25 orange yellow is more orange than C58.  Again I recommended to use SF 283 or GS 002 as surfacer to get this brightness.  GA 25 is good for :

Zaku I Thunderbolt Ver.
RGM-79[G] GM
RB-79K BALL
Full Armor Gundam
Duel Gundam Assault Shroud
Gundam Heavyarms
NRX-044 Asshimar
Nobell Gundam [Berserker Mode]
Gundam G-Self Assault Pack
Gundam Astray Blue Frame Second L
Blaze Zaku Phantom
Gale Strike Gundam
Regen Duel Gundam
Gouf Ignited
Gundam Kyrios
Arios Gundam
Gundam Harute
Gundam Gusion Rebake


77

 

Gaia VO03 Vivid orange has more orange color than GA 25 orange color . It is also fluorescent color.  To get this brightness it is recommended to use SF283 base white 1000 or GS 02 surfacer evo white as surfacer. GA  Vo 03 is good for model kitt :

Zaku I Thunderbolt Ver.
RGM-79[G] GM
RB-79K BALL
Full Armor Gundam
Duel Gundam Assault Shroud
Gundam Heavyarms
NRX-044 Asshimar
Nobell Gundam [Berserker Mode]
Gundam G-Self Assault Pack
Gundam Astray Blue Frame Second L
Blaze Zaku Phantom
Gale Strike Gundam
Regen Duel Gundam
Gouf Ignited
Gundam Kyrios
Arios Gundam
Gundam Harute
Gundam Gusion Rebake


78

 

Comparision of C58, Ga 25 and GA 03. It is quite hard to see the differences among them with camera.  You need to look them more intensively



79

Mr color c133 RLM04 yellow.  This yellow color has around 90% yellow and 10 percent red. Because of the red mixed, this color is quite eye friendly. C133 is also common color for many model kitt. To get this brightness it is recommended to use SF283 base white 1000 or GS 02 surfacer evo white as surfacer.


 

80

Mr color C329 yellow FS 13538 has even more red than C113 RLM and GA  03 yellow.  It is also eye friendly due to its 85% yellow and 15% red mixed. I used this color often for my model kitt Gundam.   Again to get this brightness it is recommended to use SF283 base white 1000 or GS 02 surfacer evo white as surfacer.


 

81

GA  VO 33 mild orange is a perfect color for you who make model kit with “designer color” Bandai color. This color is also good for :

RGM-79[G] GM
Zaku I Thunderbolt Ver.
Duel Gundam Assaultshroud
Arios Gundam ~ Designer’s Color


82

All together, I will add mr color C109 chara yellow in the future.

Today I feel soo blue

Mr color C5  Blue is a common blue for Gundam
This sample is using SF283 Base white 1000 as surfacer. If you want to have darker blue, you can use sf 284 Mr surface 1000

mr color


mr color

Mr color C34 Sky Blue is a bright blue and recommended for  :

– Sword Strike Gundam
– Gundam G-Self
– Brave Commander Test Type
– Gundam X Maoh
– Carta’s Graze Ritter
– EWAC Zack
– Prototype Gouf [Tactical Demonstrator]
– Zaku II + Big Gun Set Thunderbolt Ver.

I am highly recommended to use SF283 Base white 1000 or GS2 Surfacer white for primer


mr color

C328 Blue FS1505. Another name for it is “Blue Angel” and it is a common color for airlines model kitt. Its dark blue is also compatible for Kit Gundam RX79 Gundam


68

Mr color C74 Air Superiotity Blue is a pastel blue color and also common used for airline model kitt.  I also recommend this blue for Gundam :

– RGM-79 GM
– RGC-83 GM Cannon II,
– RGM-79N GM Custom
– RX-160S Byarlant Custom

My sample is using SF283 Base white 1000 for surfacer


69

69 Mr color C72 Intermediate blue is a color for airline model kitt with code FS 35164.and can be use for Gundam :

RB-79 Ball ~ Shark Mouth type
Delta PlusDuel Gundam Assault Shroud
MSF-007 Gundam M-III
Dijeh
Schuzrum Galluss
Psycho Gundam
EMS-10 Zudah
Dreissen [Unicorn Ver.]
Jesta
Base Jabber [Unicorn Ver.]
Byarlant Custom
GM Sniper II
Doven Wolf [Unicorn Ver.]
Messala
Strike Freedom Gundam (Xiphias Railcannon)
Freedom Gundam (Xiphias Railcannon)
Hail Buster Gundam
Zaku Warrior + Gunner & Blaze Wizard
Mobile Ginn
Miss Sazabi
Hyakuren
Lightning Gundam


All Blues together.

70

 

 

Gaia Virtual On and Gaia

Today, I am testing Gaia and Gaia “ Virtual On” , a unique color from Gaia. Although the price of “Virtual on” is slightly expensive, it is hard to mix colors to get Gaia “Virtual On” color.  Gaia “ Virtual On” has also many bright colors as if it is mixed fluorescent colors.


Ga 16

Gaia GA 16 has a slightly darker pink and it is good for model kitt  Qubeley, Strike Rouge, Infinite Justice Gundam,Ryusei-go (Graze Custom II), Clanche, AMX-003  and Gaza C

In the future I will try to add a little orange to produce red for Kitt character, please wait for the future review


51

Sample of comparision GA  16 and Gaia VO 24.  I will compare mr color pink in the future.


ga vo 27

Gaia Vo 27 Homura Azuki, has a unique color like Azuki or red bean. It is recommended for kitt: Zaku II Char, Gelgoog Char, Justice Gundam, Throne Drei Gundam, Amida’s Hyakuren , Qubeley, AMX-003 Gaza C,  and Zaku Lunamaria Hawke


54

Ga Vo 05 Fresh mint Green has a fresh unique blue color


ga vo 22

GA Vo 22 Moegi Green. This color is good for Vent Saviour Gundam, Bearguy F,  and Adele ,Carta’s Graze Ritter from i G-Tekketsu series
This  green has slightly fluorescent which is good for censor color. Because of that I also recommend to use this color for  Meteor Hopper and Shaldoll Custom


57

Gaia GA  18 emerald green has a calm green and good for Gadessa, Gundam Portent, and Forbidden Gundam


58

Comparison of GA 18 emerland green and GA Vo 22 Moegi Green . I will add more similar green color in the future


For Summary, These are the test colors I did on this review.

summary

color for frame or inside structure of Gundam

Today test sample are color for frame or inside structure of Gundam. To produce glossy C61, use C2 black gloss as preliminary paint before C61.  Without C2 as preliminary paint, the C61 might look flat.  Among all the colors, I used C28 for metallic frame or Structure and C333 for non metallic frame or structure because these two colors has similar color with the one in Runner Bandai. Another color that I like is C25 Dark seagrayy but it is not for frame .  I use it as accent like the white Rg or among gray frame

frame color 38 39 40 41 43 42 44 45 46

frame color


Mr color Rapid Thinner on Mr color C8 silver and C9 gold

Rapid thinner on c8

These are the test of Mr color C8 and C9 using Rapid thinner. It seems that Mr color has change the composition on C8 and C9 recently.  As far as I remember the result mixing C8 and C9 with Thinner leveling in past I had no problem.  Now those two color if mixed with Leveling thinner the paint did not mix well with leveling rapid thinner on c9Thinner particulary using air brush. When it dry, It is not as smooth as in the past. However This uneven paint can be solve instantly with Rapid Thinner.  For better richer color of C8 and C9, using black gloss as under paint is a must.